Carrying large blocks of stone or bags of cement (sand) by hand is not the best option, since there is a chance of injury.
Therefore, for carrying heavy loads on a summer cottage or on the territory of a private house, you can make a simple device from a profile pipe. Also, pieces of the usual building corner will still be required.
First, it will be necessary to cut 4 short and 2 long sections of the profile pipe 20 * 20 mm. Then, from the obtained blanks, it is necessary to weld a rectangular frame. Inside the frame are three sections.
The main stages of work
After welding, it is necessary to clean the welds so that there are no irregularities and roughnesses. For this, the master uses a small grinder and a cord brush. But you can also clean the profile with a petal circle.
The next step is to weld to the handle frame. To make them, you will need two pieces of a round pipe and four pieces of a building corner. Before welding, the parts will need to be cleaned with a grinder.
Then it remains only to cut the size of the metal grid, and weld it to the cells located on the sides of the assembled structure. Welds must be cleaned. Then you can start painting.
For details on how to make a simple device from a profile pipe for carrying heavy loads with your own hands, we recommend that you watch in the video on our website.
