Homemade anti-theft lock on a car trailer

Pin
Send
Share
Send

Very often, not only vehicles, but also trailers for them fall into the field of view of hijackers. Therefore, an anti-theft lock for a car trailer never hurts. You can make it yourself from a square pipe.

In addition to the profile, you will also need a lock and a loop, which would fit in size to the profile pipe. To connect the parts, the author uses semi-automatic welding. You will also need a grinder with a cutting disc.

First of all, from the eyes that are supplied with the round padlock, it will be necessary to cut off all the excess with a grinder or plasma cutter so that you can then weld them to the profile pipe.

The main stages of work

At the next stage, the master cuts the profile pipe along, and then a loop is welded to the end. If the loop is larger in size than the profile, then the excess will need to be cut off with a grinder.

Then, it will be necessary to weld the eyes for the lock to the two halves of the profile (side). The most important thing is to expose them evenly, otherwise the castle may then not stand in its "seat".

We try on an anti-theft lock - we put it on the coupling device of a car trailer. If everything works fine, then you can start grinding and painting.

For more information on how to make a homemade anti-theft lock on a car trailer, we recommend that you look in the video on the website.

Pin
Send
Share
Send

Watch the video: DIY Travel Trailer Lock - How To Make (December 2024).