HOW TO REMOVE DENTS ON WOOD

Send

Using the method in question, you can remove dents not only on ordinary unprocessed wood, but also on lacquered furniture, parquet, etc. In general, the method is widely applicable to almost any wooden surface, which is good news.
The method is based on the fact that almost any material, under the influence of internal stresses, seeks to restore its original shape. The tree in this regard is no exception. We will only help him a little to regain his form.

We remove a dent on a wooden

So, there is a small dent on the surface.

It is necessary to take a rag or towel. Moisten thoroughly with water. Squeeze a little so that the water does not flow down a stream. And put on the surface with a dent.

Turn on the iron to maximum and iron the surface.

Under the influence of hot water vapor, the dent straightens.

From the first time, the desired result is not always always obtained. There was a small notch left.

Wet the rag again and repeat the procedure.

To achieve maximum results, you need to repeat smoothing 3-4 times. Although all depend on the condition and type of wooden surface.
As a result, there will remain a shallow risk, which is practically not noticeable, compared with what it was at the very beginning.

I repeat that in such a simple way you can remove dents even on lacquered furniture. Of course, the result may not be 100%, but a noticeable improvement will definitely be visible.
Tip: to enhance the smoothing effect, before ironing, you can sprinkle a dent in water with a spray gun and let stand for 10-15 minutes.
I had to use this method many times and in most cases, after recovery, there were no signs.
Take on arms and use. Bye everyone!

Send