CD-ROM BACKLIGHT

Send

HELLO TO ALL!!!

I want to share with you how I made the CD-ROMA backlight. What we need: second glue, soldering accessories, wires, LEDs.

I cut out the LEDs from the backlight of the mobile phone, that is, its keyboard.

At the first stage, you need to install the LEDs in the holes in the tray as I did. pour it with glue and remove wires from them to the tray.

Thin conductive plates (thin copper plate) are soldered at the ends of these wires, these plates (contact) are glued to the tray, as in the photo.

At the second stage, it is necessary to glue the spring-loaded contacts to the CD-ROMA case (in no case will it close it to the metal!). From them, we remove the wires from the CD-ROMA itself. They are connected to 5 and 12 volts on the computer chip (shown in the photo).