Share
Pin
Tweet
Send
Share
Send
For work we take materials:
- white calico.
- sewing machine.
- scissors.
- a pencil.
- acrylic paints.
- thin wire.
- brushes for painting.
A piece of corrugated green paper.
- trimming foamiran.
- some foil.
- thin satin ribbon.
- Moment glue.
- a decorative cord.
- contour for the fabric of gold color.
- a needle with a thread.
- any filler for a souvenir.
- black pen.
Let's start with the template that we draw on paper. The size will be 11 x 13 cm. And legs will be additionally needed.
We cut out two dense hearts and 4 paws with seam allowances from dense fabric. On the workpiece, we mark a segment for eversion, which we do not sew. We also mark the places under the paws.
The first we build up the blanks of the paws and turn them around.
Then we place them in the designated places, but inside the base blank. Only then we build up along the main circuit. And gently twist, straightening all the corners. Then we take a thin wire and with it we repeat the contour of the bunny ears. Then, through the free section, carefully insert it into the ears themselves.
Now it will be possible to fill the entire souvenir tightly. We also insert filler into the ears.
It remains only to sew a hole with small stitches. Then draw a contour of the muzzle with a pencil and a corner from the heart. Then with a thread we make a tightening along the drawn contour from the heart. We pierce the needle completely through the thickness of the heart so that the same contour is also from the back.
Now go to the coloring step. We tone the whole heart shape in red. We paint the paws and head with ears in a light brown tone. And on the dried paint all the contours of the face of the hare circled with a pen.
It is necessary to further tint with brown the middle of the ears, around the eyes and the bottom of the muzzle in a circle. At the seams of the legs should also be painted a little.
We continue to work now with white paint. We draw cheeks, whites near the eyes and a little in the middle of the ears.
Next, you need a blue color for the iris. It is only necessary to take into account that closer to the pupil the iris brightens.
It remains to add a brown nose and black pupils. While they dry, tint the edges of the heart darker tone. Now we return to the face, and again we repeat all the contours with a black pen. We also draw cilia, antennae. And add white highlights on the eyes, nose.
The base of the pendant souvenir is ready. Thanks to the wire, the ears can take various forms.
We turn to the manufacture of a bouquet of flowers. We take small scraps of foamiran, cut out the shape of droplets, a few green leaves and 5 pieces of wire, because there will be five colors.
To make one flower, we take a piece of foil, a wire of 7 cm, 2 leaves, 3 small petals and 6 larger ones, a little corrugated paper.
First, make a droplet of 1 cm from the foil, and fasten it well to the wire. Then glue on the resulting flower base, 3 small petals. It is necessary to completely close the foil. Then we fix the remaining parts in a circle. It turns out a flower.
Now add the green leaves and glue the whole wire with paper. The flower comes to life.
But there will be 5 of them in our bouquet. We select colors to your liking. Combine them in a bouquet, and try on the arrangement of a souvenir. We twist the wire a little together and tie a bow from a thin ribbon. Add a large green leaf if desired.
It remains only to sew him in the clutches of a bunny. We make inconspicuous stitches.
To complete, there were small details. From a decorative cord we make a loop for hanging a souvenir. We fix it between the ears of a hare. And on top we glue a small piece of fur, with which we close the junction.
Ahead of the bunny is a beautiful bouquet, and from the back we will draw an arbitrary curl for decoration with a golden color contour.
Souvenir heart with a bunny ready. And in the company they look great.
Good luck to all!
Share
Pin
Tweet
Send
Share
Send