Share
Pin
Tweet
Send
Share
Send
Step 1. By purchasing a peroxide solution, you can go directly to lens cleaning. To implement the procedure you will need:
• cleaning solution;
• special flask with a platinum element;
• tweezers;
• lenses.
At the first stage, everything should look something like the photo.
Step 2.Open the container with the lenses and remove the tweezers from the case.
Step 3. We need to place the lenses in special cells of the flask and fix them. To do this, take out the white retainer from a special container and open the lid on one side of it.
Step 4. Using tweezers, place one lens in the retainer cell and close the lid. We carry out similar actions with the second lens.
Step 5. Attach the latch to the lid of the purification flask and set it aside.
Step 6. Pour peroxide solution into a special container (not higher than the restriction line) and immerse the retainer with lenses in it.
It can be seen that I poured a little solution and it does not completely cover the entire lens. It can be fixed. It is enough to open the flask again and add the required amount of liquid.
Step 7. The tightly closed cleaning flask must be turned upside down for a couple of seconds, and then returned to its original position. Cleaning processes are already running.
Step 8. The lenses must be left in the cleaning solution for 6 hours. Under no circumstances should you ever remove it! It is fraught with a burn of the eye. Staying lenses in peroxide solution for more than 6 hours will not hurt your eyes.
It should also be borne in mind that all solutions have different cleaning times, so before using any of them you need to read the instructions.
Share
Pin
Tweet
Send
Share
Send